Best Anker SOLIX Accessories: Essential Add-Ons & Upgrades

For frequent travelers, charging speed can matter more than adding another battery. The SOLIX Alternator Charger is designed to charge compatible power stations using a vehicle's electrical system.

Anker advertises up to 800W charging, compared with the much lower power typically available through a vehicle's standard 12V accessory socket. The actual charging rate depends on the connected station, charging cable, alternator capacity and vehicle operating conditions.

Anker documents compatibility with selected SOLIX systems including the original C1000, C1000 Gen 2, C2000 Gen 2 and F3000. The connection method differs by model: some use the supplied PPS XT-60i cable, while others require an additional expansion-port cable.

The charger supports selected 12V and 24V vehicle starter-battery systems. Anker specifies that it is not intended for electric vehicles.

Best for: Drivers who frequently recharge their station while traveling.

Skip it if: Your station stays at home, you rarely drive long distances or your vehicle and power station are not on Anker's supported compatibility list.

The BP1000 is one of the most practical upgrades for owners of the original 1,056Wh SOLIX C1000 who need more runtime but are satisfied with their existing station's output capability.

Anker specifies 1,056Wh of additional capacity, doubling the combined nominal capacity to 2,112Wh. It uses LiFePO4 cells and is designed to work through the compatible station's expansion system.

More capacity generally means longer potential runtime at the same load. It does not increase the original station's rated continuous AC output.

Best for: Original C1000 owners whose main limitation is runtime.

Skip it if: You own a C1000 Gen 2, need more AC output or would be better served by a larger replacement station.

If you already own a compatible F2000 or F2600, adding the correct expansion battery may be more useful than purchasing another standalone station.

The BP2000 adds 2,048Wh of nominal storage. For a compatible 2,048Wh F2000 configuration, this creates a 4,096Wh system.

Anker also offers a BP2600 battery rated at 2,560Wh for specified F-series configurations. Choose based on the exact host model, supported battery combination, capacity needs and total cost.

Best for: Compatible F2000 and F2600 owners needing longer backup.

Skip it if: Your power station belongs to a different expansion family or you need higher inverter output rather than additional stored energy.

The BP3800 is intended for buyers building a larger SOLIX F3800-based backup system. Each compatible expansion battery adds 3,840Wh of nominal storage.

This matters when you need to support selected household loads for longer outages. Anker documents multi-battery configurations for F3800 systems, but the supported maximum depends on whether one or two stations and additional integration hardware are used.

Capacity expansion does not automatically increase inverter output. Higher-output configurations may require additional compatible power stations and specific integration equipment.

Best for: F3800 owners building extended emergency backup.

Skip it if: You have a smaller SOLIX station or only need short-duration portable power.

The PS200 Bifacial Portable Solar Panel is an appealing addition for campers, RV users and anyone who wants a charging option that does not depend entirely on grid power.

Anker rates the panel at 200W, with a specified operating point of 48V and 4.16A. It weighs approximately 10.6 pounds and folds for transport.

Its bifacial design can collect additional reflected light from the rear under suitable conditions. That does not mean the panel will continuously deliver its nameplate wattage in ordinary use.

The PS200 has an IP68-rated panel assembly, but Anker advises against exposing it to heavy rain or submerging it. Protect electrical connections and follow the manufacturer's instructions.

Best for: Compatible SOLIX owners needing portable daytime recharging.

Skip it if: You rarely operate away from grid power or need more battery storage rather than a new charging source.

An F3800 can power appliances directly through its supported output connections. But if you want selected circuits in your house to receive backup power, a properly installed transfer-switch arrangement may be more convenient and safer than running extension cords.

Anker offers F3800-compatible home backup kits, including a six-circuit manual transfer switch and other configurations for different circuit requirements.

The correct solution depends on your station model, circuit loads, electrical service and installation requirements. The transfer switch does not create additional battery capacity.

Best for: F3800 owners planning permanent emergency backup for selected circuits.

Skip it if: You only need portable plug-in power or are not ready for an installed home-backup system.